What size power station do you need for a CPAP?

For one night without the heated humidifier, most people need roughly 300–500 Wh of rated capacity. With the humidifier on, or for several nights, you’ll need much more.

This is general information, not medical advice. Check your machine’s manual and talk to your equipment supplier before relying on battery power for a medical device.

Step 1: find your CPAP’s real power draw

CPAP power use varies a lot by model, pressure setting and accessories. Without a heated humidifier or heated tube, many machines draw somewhere around 30–60 W on average. The heated humidifier is usually the biggest single factor and can raise consumption several times over.

The rating printed on the power supply is a maximum, not what the machine normally uses. The most accurate way to find out is to plug the CPAP into an inexpensive plug-in watt meter for a full night and read the total watt-hours in the morning.

Step 2: do the maths

Multiply average watts by hours of use, then divide by about 0.85 to allow for inverter losses when you run the CPAP from the AC outlet:

SetupAverage draw8 hoursRated capacity to look for
No humidifier, low pressure30 W240 Whabout 300 Wh
No humidifier, higher pressure50 W400 Whabout 500 Wh
Heated humidifier on90 W720 Whabout 850 Wh or more

Add a buffer of around 20% on top, because batteries lose some capacity in the cold and as they age.

Step 3: use DC power if you can

Many CPAP makers sell a DC power cord or converter that plugs into a 12 V or 24 V outlet. Running from DC skips the station’s inverter, so less energy is wasted and the same battery lasts noticeably longer. Check with your manufacturer for the correct cable for your model.

How many nights do you want to cover?

For a single-night outage, a station in the 300–500 Wh range is often enough without the humidifier. For storms that knock power out for two or three days, look at 1,000 Wh or larger, or plan to recharge from solar panels or a car during the day.

Which stations fit?

Our sizing tool lets you tick “CPAP machine”, set the hours and see which stations have enough capacity, ranked by cost per usable watt-hour.

Open the sizing tool