How to size a power station: watts, watt-hours and usable capacity
Two numbers decide whether a power station will work for you: how many watts it can deliver at once, and how many watt-hours it stores. Most buying mistakes come from looking at only one of them.
Watts: can it run your devices at all?
Output in watts (W) is how much power the station can deliver at any moment. Add up the watts of everything you want to run at the same time. If the total is higher than the station’s rated output, it will shut down. Motors and compressors, such as fridges and pumps, also need extra surge watts for a moment when they start.
Watt-hours: how long will it last?
Capacity in watt-hours (Wh) is how much energy is stored. A 100 W load running for 5 hours uses 500 Wh. To estimate what you need, multiply each device’s average watts by the hours you’ll use it, and add them up.
Usable capacity is lower than the label
Power from the AC outlets passes through an inverter, which loses some energy as heat. Plan on getting roughly 85% of the rated capacity from the AC outlets. Divide what you need by 0.85 to find the rated capacity to buy, then add about 20% as a buffer for cold weather and battery ageing.
LiFePO4 or lithium-ion?
Most current power stations use LiFePO4 (lithium iron phosphate) batteries. They’re typically rated for thousands of charge cycles, several times more than older lithium-ion packs, though they’re a little heavier for the same capacity. If you’ll use the station often, LiFePO4 is usually worth it.
Compare on cost per usable watt-hour
Once you know the capacity and output you need, compare stations on price divided by usable watt-hours. It puts a small and a large station on equal footing, so you can see which one gives you the most energy for your money.
Compare stations in the sizing tool