How long will a power station run a refrigerator?
A typical full-size home fridge uses roughly 1–2 kWh a day. That means a 1,000 Wh power station will usually keep it running for somewhere around half a day to a day, depending on the fridge.
Running watts vs average use
A fridge’s compressor switches on and off. While it runs, a typical home fridge draws somewhere around 100–200 W, but it isn’t running all the time, so its average draw over a day is much lower. That average is what drains your battery.
The easiest way to find your fridge’s daily use is its energy label. In the US, the yellow EnergyGuide label lists estimated kWh per year. Divide by 365 to get kWh per day:
| Label says | Per day | Rated capacity for 24 hours |
|---|---|---|
| 400 kWh/year | about 1.1 kWh | about 1,300 Wh |
| 550 kWh/year | about 1.5 kWh | about 1,800 Wh |
| 700 kWh/year | about 1.9 kWh | about 2,250 Wh |
The last column divides by 0.85 to allow for inverter losses.
Don’t forget the startup surge
When the compressor starts, it briefly pulls several times its running watts. If the station can’t handle that surge, it will shut off even with a full battery. Check the station’s surge (peak) rating, and as a rule of thumb look for at least 1,000 W of continuous output for a full-size fridge.
Stretch your runtime
Keep the doors closed as much as possible. A closed fridge stays cold for hours on its own, so you can also run it in shifts: power it for a few hours, unplug it for a few, and use the battery for other devices in between. Turn off ice makers and anti-sweat heaters if your fridge has them.
Find a station that fits your fridge